Free HP Deskjet 3820 Color Inkjet Printer driver v.1.0
To download file - enter code from the image and click button "Download file"
Category:
Printers
Manufacturer:
HP
Hardware:
HP Deskjet 3820 Color Inkjet
Software name:
Printer driver
Version:
1.0
File Size:
58.43Mb (61269123 bytes)
Archive type:
SFX (Self-Extracting). View archive content
Released:
27 Mar 2006
Uploaded:
07 May 2008
Views:
10447
Downloads:
2726
System:
Windows XP 64-bit
Description:
x64 Beta Driver for Inkjet Printing Products
Beta driver providing basic print and scan functionality.

Note: No customer support is available for this Beta driver.

Installation Instructions

Follow the installation instructions below for your printer connection, USB or Networked (Wired and Wireless).

Installation Instructions: USB Connection
1. Download the x64Drv5.64.0.17.exe file.
2. Once downloaded, choose Open or just run the x64Drv5.64.0.17.exe.
3. Follow onscreen instructions listed below.
Note: There may be a long pause between each of the steps below.
4. Choose Direct Connect.
5. Power on the printer, and connect it to the computer when prompted.
6. The "Found New Hardware Wizard" will be displayed.
7. Select No, not this time.
8. Select Install the software automatically (Recommended).
9. Depending on your product, you might see one or more Windows' warning screens.
10. Click Continue anyway or Yes each time these Windows warning screens appear.
11. Click Finish.
12. Reboot your computer (Highly Recommended).

Uninstall Instructions: USB Connection
1. Click Start.
2. Click Control Panel.
3. Double Click Add or Remove Programs.
4. Select Beta Printer Drivers for Windows XP x64 (5.64.0.17).
5. Click Remove.
6. Reboot your computer (Highly Recommended).

Installation Instructions: Network (Wired and Wireless)

Checklist for Wired Network Setup:
1. Turn the printer on.
2. Ensure the printer is connected to the network.

Checklist for Wireless Network Setup:
1. Turn the printer on.
2. Ensure the "Wireless" is turned on for the printer. (Typically signified by Blue Light on printer.)
3. Write down the wireless setting for your network. They are stored in the access point (the box with antennas).
4. To get to the access point:

a. Press the Windows key and the R key. Type CMD and press ENTER.
b. Type IPCONFIG and press ENTER.
c. Write down the IP address that appears in the line that says "Default Gateway". Example "192.162.0.1"
d. Press the Windows key and the R key. Type http:// and press ENTER . Example http://192.168.0.1. That will take you to the access point web server. Check your access point manual for more instructions.
e. You need to find the following settings.
i. SSID or Network name
ii. Encryption (None or disabled, WEP or WPA)
iii. Key or paraphrase

f. If you cannot find these settings, contact the manufacturer of your access point for help.
5. If your printer has an LCD display, press Setup, go to the network menu and select the wireless configuration option (usually called Wireless Setup Wizard) and follow instructions.

Note: If the printer cannot connect to your wireless network:
1. Ensure MAC address control/filter includes new printer's MAC addresses OR MAC address control/filter is turned "Off".
2. Ensure SID broadcasting is temporary enabled for easier setup.
3. Follow your setup instructions that came with your printer for more information on configuring your wireless printer.

Installation instructions: Wired and Wireless Network
1. Download the x64Drv5.64.0.17.exe file.
2. Once downloaded, choose Open or just Run the x64Drv5.64.0.17.exe.
3. Follow onscreen instructions listed below:
Note: There may be a long pause between each of the steps below.
4. Choose Network.
5. Choose your printer after the installer has identified it on the network.
6. The "Found New Hardware Wizard" will be displayed.
7. Select No, not this time.
8. Select Install the software automatically (Recommended).
9. Depending on your product, you might see one or more Windows' warning screens.
10. Click Continue anyway or Yes each time these Windows warning screens appear.
11. Click Finish.
12. Reboot your computer (Highly Recommended).

Uninstall Instructions: Wired and Wireless Network
1. Click Start.
2. Click Control Panel.
3. Double Click Add or Remove Programs.
4. Select Beta Printer Drivers for Windows XP x64 (5.64.0.17).
5. Click Remove.
6. Reboot your computer (Highly Recommended).
Legal information:
All software on DriversCollection.com are free of charge type. All brands and logos are property of their owners.
Attention:
Some software were taken from unsecure sources. We do not guarantee its workability and compatibility. Always check downloaded files with antivirus software. We do not cover any losses spend by its installation. Downloading files from DriversCollection.com means you are informed about it and agree to Agreement.
Enter Code from the image:
code
If you experience problems with reading the image code, click here for request download link via Email.

Agreement :: Privacy Policy

Copyright © 2002-2014 Driverscollection.com